软管泵_滑模机N年生产经验的详细视频已经上传，从产品的外观到内在，从功能到性能，视频将为您呈现一个真实、的产品形象。


以下是:软管泵_滑模机N年生产经验的图文介绍




工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 




豫信致诚机械设备有限公司(濮阳分公司)带您了解 工业软管泵,本产品由豫信致诚机械设备有限公司(濮阳分公司)厂家直销，以下是 工业软管泵的图文介绍，希望能帮助到您。




软管材质：天然橡胶，采取单管与双管设计； 软管通径约小规格15mm； 规格100mm；流量小规格0.15立方/小时； 规格80立方/小时；出口压力 1.6MPA ； 性能特性高含固量的流体、半流体；腐蚀、非腐蚀；  颗粒 软管通径的1/4,无尖锐棱角；低压短距离吸送，无阀工作，无回流，泵送料流稳定，故障率低。 进排口可自由转换，当有异物堵塞时，倒转便可排出堵塞物；真空度高，自吸能力强 ；维修简单快捷，易损件少（仅挤压软管） ；适用温度小于90℃。           




首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

 


点击查看豫信致诚机械设备有限公司(濮阳分公司)的【产品相册库】以及我们的【产品视频库】